I’ve been on the lookout for a smart thermostat for literally years now. Smart thermostats aren’t a particularly new thing, with devices available from manufacturers like Heatmiser and Honeywell for several years, however Nest really shook up the market a couple of years ago, when they launched the first version of the Nest thermostat. Designed by Tony Fadell, the man responsible for Apple’s iPod family, the Nest is a beautiful bit of kit and I immediately decided I must have one. My hopes were quickly dashed when I realised that Nest was designed for the US market, who’s heating systems work in a different way to European systems, meaning Nest cannot be used in Europe without some serious modifications. Nest said they were planning on launching in the UK, but wouldn’t give a date. Over two years later and well into the second generation of Nest thermostat and there’s still no UK launch date.
It was about a year ago that I first heard of tado, who appeared to be offering a Nest-like thermostat for Europe. This seemed to be just what I wanted, so I began looking into it. I was initially disappointed with the tado, upon discovering it was just a plain white box, which seemed a bit of an anticlimax when compared with the Nest. Having looked a bit further into tado, it became clear why the device itself is so plain. This is the single biggest difference between tado and Nest – Nest is all about the thermostat, whereas tado is all about the system and the thermostat is just another component of that system that the user shouldn’t have to worry about. Thinking about it further, this approach makes so much more sense. Although Nest has smart phone control, the thermostat itself is stil the main focal point. Yes, the thermostat is a lovely bit of hardware, but why does it need to be? If it’s such a smart heating system, why do you still need to touch the thermostat? tado take a different approach – All of the bling is in the app rather than the thermostat, as that’s where you control it from. It’s a beautiful and easy to use interface and you find yourself simply forgetting about the hardware.
My old thermostat & heating timer were pretty crude and, I suspect, a common setup in the UK. I could program two or three heating periods so the heating comes on for a bit in the morning while I wake up and get ready for work, then on again in the evening and off when I go to bed. I could have different programs for weekdays and weekends, but that’s about the extent of it. Unfortunately, my life doesn’t conform to such rigorous schedules and my house would often be heated whilst I wasn’t in, or not heated enough if for example I got up earlier than usual.
The tado is much more flexible. You can still program periods when you want your house to be heated, but if you need to make a change to that schedule, it’s far easier to do so. If I’m leaving home early tomorrow and I want the house to heat up earlier, I can now simply make the one-off change in less than a minute from my phone. Previously, I’d have had to have scrabbled about re-programming some indecipherable device in a cupboard in my hallway, which I simply wouldn’t have bothered with. Even smarter still, tado will use geo-location services on your phone to work out how far away from home you are. If I’m away from home for a few days, tado knows and won’t bother heating the house as much. When I come home, tado knows I’m on my way and heats up the house so it’s nice & warm when I get home. This is the feature that I bought tado for and its distinguishing feature from other products on the market.
You can link several smart phones (iOS or Android) to tado, so if there are several people in your house, it won’t turn off the heating until the last person leaves the house and it will warm up again as the first person is on their way back. You can also set what temperature you want tado to maintain when you’re at home and when you’re away, as well as while you’re asleep at night.
Tado learns the thermal properties of your home and will adjust itself to it. What this means is that instead of programming your heating to come on at 6:30am in the hope that it’ll be warm when you wake up at 7am, you can tell tado that you want your house to be 21 degrees at 7am and it will work out what time it needs to turn on the heating in order for your house to have warmed up to 21 degrees by that time. Because tado is internet connected, it can look up the weather for your home and judge whether it will need to turn on the heating early because it’s a bit frosty outside, or whether it’s unusually sunny and it can rely on sunlight beaming through your windows to help warm up the house. Clever stuff.
The main reason I became more interested in tado was their use of geo-location on your smart phone to work out whether you’re home or not. The Nest utilises motion sensors in the thermostat unit to work out if anyone is home. It takes Nest a few hours to work out that you’ve left the house, as it has to allow a reasonable amount of time without anyone moving near the thermostat before it decides the house is empty. Conversly, tado knows immediately that you’ve left the house, because your phone tells it so. All sounds good doesn’t it? I thought so, so I bought one. Here’s a summary of my experiences after running it for a few weeks:
Ordering & delivery:
My first impressions of customer service weren’t great. Having been told that my tado would ship on launch day (the 1st of November), I was disappointed that mine still hadn’t shipped a full ten days later. It took them several days to respond to my service request enquiring about the delivery too (although they responded to Twitter more quickly). Not brilliant, but I’ll put it down to a launch-date rush and hopefully this will become slicker with time. The website and the ordering process is nice and straightforward and the delivery tracking via DHL is great.
Again, not a great first impression. After my device had arrived so late, I was really keen to get it installed ASAP, so I logged in to the web interface to get the installation instructions for my setup, only to find… no instructions. A call to support revealed they hadn’t got all of the installation routines live on the web yet and mine would be up in a couple of days. The next day, although instructions specific to my setup weren’t available, some generic instructions had been put online, so I took the plunge and went for it. Installation was pretty simple, though actually completely different to what I’d expected.
Top left: The tado controller, top right: The tado “connector”, bottom: wireless thermostat
The other bits that come in the box. Everything you need is here, including all screws, rawl-plugs and even stickers to label the cables as you remove them from your old control unit & thermostat.
I had thought of tado as a thermostat replacement and I expected to replace my existing thermostat with the tado box. I assumed that I would set my heating controller to permanent on and let Tado control the heating via the thermostat connections. The way it actually works is the complete opposite of that. The tado box replaces the heating controller and the thermostat is replaced by a blanking plate containing a circuit that basically bypasses the thermostat connections entirely, instead relying on a new, wireless thermostat device that came with the tado. This makes sense, but was a lot different to what I was expecting. The wiring for the heating controller was more complicated than the thermostat, but still pretty simple and not too much for anyone competent with DIY and home electrics to do themselves. Many people of course aren’t comfortable working with 240v electrics, which is fair enough and you have the option for tado to arrange an engineer to install it for you at an additional cost.
The blanking plate that replaces your thermostat
The wiring of my old heating controller
The main tado box, installed where the heating controller used to be
My old heating controller and thermostat
It’s worth noting that while my experience with the installation instructions wasn’t great, it was again down to Tado being ill-prepared at launch and by now, the installation would be much slicker. The online installation guide is actually one of the best I’ve seen and I particularly liked the visual indicators showing the success of various steps as you perform them. For example when you plug the gateway device into your router, a box on the web interface turns green to show that it can be seen by the tado servers. The same happens when you turn on the power after installing the tado box itself. This in particular gave me a warm fuzzy feeling, as there’s always a bit of nervousness after installing something like that – “have I wired it up right? Will it work?”. Well, it tells you straight away, so you don’t have to sweat for long!
I hadn’t had a great deal of luck with the delivery or installation steps, so I was really hoping that now it was installed, it would be plain sailing. Sadly, this wasn’t the case. I was really keen to test the location services aspect of it, so I installed the app on my phone and fired it up. What I was expecting was for tado to show me at home and be heating the house to my “home” temperature. What I actually saw was tado showing me as away from home and allowing the house to cool down to my away temperature.
I started checking my settings – tado had my correct address, so it knew where home was and location services on my phone were configured correctly for tado. Firing up Google Maps showed me at exactly the right location, so why did tado think I was away? I logged a support call with tado via email and while I waited for a response I played with various settings and scoured the internet for info, all to no avail. A week later and having still had no response from tado to my support ticket, I was getting a bit annoyed. I now had a heating system that I had to remember to manually turn on and off when I went to and came back from work. I gave up on the email support and called tado instead. I wish I’d done this sooner, as the guy on the phone was actually really helpful and quickly found the problem.
The tado app uses location services to determine whether you’re at home, or if not, how far away from home you are. It doesn’t need to be super accurate, so it tries not to use GPS, as that would harm battery life. Instead, it uses other location sources like phone masts to determine your approximate location. I live in a rural area and there is only one phone mast that can be picked up from my house, which is approximately 4km away. When I’m at home, as the tado app can only see one mast, it determines that as my location, which is far enough away from my house for tado to think I’m away. In order to rectify this, the guy I spoke to from tado support had to extend the range that tado considers “home” from 500m to around 5km. That fixed the initial problem of tado thinking I was away, as that distance incorporated the phone mast. Unfortunately, I work around 10km away from home and now when I’m at work, tado still thinks I’m at home and doesn’t turn down the heating. I asked if there’s any way to refine how tado determines that I’m at home, for example if it could detect my home WiFi network and use that to determine if I’m at home, that would be a good start. Apparently this works on Android, but Apple won’t let apps see that data on the iOS platform and of course I’m using an iPhone. They did say they’re working on a workaround for this issue on iOS and also that there are some app enhancements being worked on which will allow you to change your home location (though I’m not sure how this will be implemented) and to change the radius around your house that tado considers “home” (you currently need to call support to get this changed).
At the moment, tado isn’t working very well for me and is a bit of a disappointment, but I’m hopeful that with their planned app enhancements it will soon work much more effectively. Also, I should point out that I’m an unusual case and it’s because I live in a rural area and work close to home that it’s not working for me. I’m sure if you lived in a more urban area, or somewhere with more mobile phone masts, Tado would work much more effectively. Overall, I think Tado shows a lot of promise, which makes it all the more frustrating that it’s just not working for me.
I’ll update this article as things develop.
Update – 12th March 2014:
Yesterday, an update for the tado iPhone app became available. The description in the app store was vague, just citing “bug fixes”, but I downloaded it. I noticed this morning that the tado web site had also recently been updated with a brand new (and in my opinion, much nicer) look & feel. The new web site also has some new functionality. I noticed that in the account settings, the pin in the map that shows the home location was in completely the wrong place, several miles away from my home (despite the written address & postcode above it being correct). With the new update, I discovered I can now drag and drop this pin, so I dragged it to where my house actually is and with eager anticipation opened the tado app on my iPhone to see if it had noticed I was away from home. It hadn’t. I opened Google maps to give location services a nudge and then went back into the tado app and, to my elation, it had noticed that I was away from home. Finally, tado seems to be doing what it says on the tin. It’s been next to useless for the last 5 months, but it now finally seems to do what I actually bought it for and I couldn’t be happier! Hopefully, it will continue to work as expected!
Update – 9th April 2014:
Last week, Nest finally launched a UK version of their thermostat. I don’t care. Since the tado app & website updates in the middle of March, my tado has been working like a dream and has made up for all the initial problems. Having used tado for a while now, I see it as far superior to the Nest thermostat, so I have no regrets buying a tado now that Nest is available in the UK.
I have a friend who has also recently purchased a tado and although he also had issues with his device being delayed and arriving a few weeks later than promised, he had non of the issues I had with the installation & use and he’s quite happy with it now it’s up & running. He’s also using tado to control hot water in his house and he’s reported limited functionality in the control of that aspect of it. He’s fed back to tado, who have said they intend to incorporate enhancements in hot water control in a future app update.